The Ford Focus is well-liked among customizers and installing a car alarm is a priority. Putting in an alarm system on the Ford Focus requires considerable wiring expertise and a clear understanding of automobile electronic systems. Popular choices to incorporate throughout this venture are distant start and energy window activation with more complex systems. Putting in a basic alarm in the Ford Focus takes about two hours.
Ford Focus Car Alarm Installation Instructions
1. Learn the alarm handbook rigorously and keep the technical help quantity for the alarm helpful in the occasion you will have questions. Open the hood and disconnect the positive battery cable. Connect the alarm energy wire to the constructive battery cable and run it alongside the firewall to the motive force’s side.
2. Mount the siren in an open area within the engine bay of the Focus, dealing with the engine to restrict water contact whereas driving. Slide the driving force’s seat all the way in which back and remove the screws holding the underside of the steering wheel case in place.
3. Establish the starter wire and attach the start disable relay. Join the ability lock module to the lock relay next to the fuse box. Drill a small hole within the dash for the LED gentle and snap it into place.
4. Set up the shock sensor per the manual’s directions and pull the wires under the dash. Feed the power and siren wires through the firewall and join them to the alarm management module. Attach the remainder of the wires to the alarm module and secure it as far again into the sprint as possible. On models previous to 2008 place the management module behind the radio for improved security.
5. Reconnect the optimistic battery cable and take a look at the alarm. Alter the sensitivity as essential and secure any unfastened wires with zip ties.
